Tag Archives: Contact

ONGAA CAM for Biesse – In Production

ONGAA CAM – Basic for Biesse and the Nesting Option have been releases!

 

With ONGAA CAM basic for Biesse you can now program your Biesse CNC machine directly from SOLIDWORKS in a single/simple 3D environment.  Supported functions are Drilling (vertical and horizontal), Routing (vertical and horizontal), Pockets (rectangular and polygons) and Sawing.

ONGAA CAM offers many time saving features such as ‘All hole on face’ drill selections which automatically expands a single ONGAA CAM process into individual drill processes in BiesseWorks.

Using the power of SOLIDWORKS for modelling provides additional business solutions because this also effective makes all programs parametric.  This is because the programming steps are stored with knowledge of the model.  As the model changes the programming steps are generated with all new geometry.

 

With ONGAA CAM and SOLIDWORKS you really can ‘Design it once’ and ‘manufacture it in 1000 different sizes’.

ONGAA CAM is both … Read the rest

Comments Off on ONGAA CAM for Biesse – In Production

Smooth contours with ONGAA CAM makes all the difference

SmoothContourMaking ‘spline’ contours is a time consuming process in WoodWOP but with ONGAA CAM, smooth contours are simple and fast.

In WoodWOP the process usually starts with a list of points that came from a drawing or by manual calculations.   These points are then entered, if done correctly, as ARC segments or LINE segments.  The result should be a smooth approximation of the curve.

Unfortunately many other programs that generate MPR contours only generate straight line segments.

In this image we show the difference between a straight segment ellipse (lower half stating with the blue segment) and an arc segment ellipse (upper half).

In each case, the segment lengths are the same.  The segments are easy to see in the lower half but the upper half required a square mark to identify the end of segment #2.

And If you can see it here, you will definitely see it in … Read the rest

Comments Off on Smooth contours with ONGAA CAM makes all the difference

ONGAA CAM – Nesting

 

Auto-Nesting is a vital time-saver for any cabinet manufacturer.

 

 

 

 

 

 

ONGAA CAM now offers a basic auto nesting function that works directly from the assembly.

Options include:

  • auto rotate of part (here grain does not matter)
  • fill horizontally or fill vertically
  • align to grain (each part to the current sheet)
  • sorting options which may alter the part arrangements.
  • multi-sheet output

Here is the generated MPR, as seem in WoodWOP, generated directly from Solidworks.
Total time to generate a ‘re-sized’ 4 unit cabinet set… 45 seconds !

 

 

 

 

 

Contact us today to see how ONGAA CAM can increase your productivity (and possibly quality of life).  We will arrange an online demonstration your parts and assemblies so you know it will work for you.

Read the rest
Comments Off on ONGAA CAM – Nesting

Contact Us

For product information, please contact sales@ongsolutions.ca or use the form below.

For technical support please contact support@ongsolutions.ca or login to the support website using your CustomerID and password.

 

For general information please use the form below and provide as many details as you can.  We are particularly interested in finding out where you have the greatest challenges in your current process.

 … Read the rest

Comments Off on Contact Us