ONGAA CAM for Wood CNCs

Making ONGAA CAM easier to use and save even more of your valuable time has been the focus of the design team over the past few months and it has paid off. ONGAA CAM now provides an even easier and faster way to add machining to models.

• Drill all vertical holes on a FACE with a single ONGAA CAM process.
• Create all vertical pockets on a FACE or SKETCH with a single ONGAA CAM process.
• Create all polygon pockets on a SKETCH with a single ONGAA CAM process.

Vertical drills and Vertical pockets both provide Min/Max criteria to allow smart WoodWOP process creation when using faces as the source of the geometry. Simply select the FACE, click All Holes and ONGAA CAM generates a vertical drill process in WoodWOP for each hole that meets the min/max criteria. As with all ONGAA CAM processes, the ‘instructions’ to expand a face

Automatic Nesting

Several automatic nesting strategies are available in ONGAA CAM which provide a quick and easy way to nest rectangular parts across many sheets of material (directly from SOLIDWORKS).   ONGAA CAM optimizes the nest to both maximize material usage as well as minimize tool changes.

But not all part are created equally.  Automated nesting assumes the required material is as defined in the work piece definition of WoodWOP.   Odd shapes would waste both material and time.

Manual Nesting – ‘Nudging’

With the latest version on ONGAA CAM, manual nesting or ‘Nudging’ is now available.

Parts can now be selected, moved between sheets, moved on a sheet as well as rotated using intuitive button controls or keystrokes.

Unlike some other nesting solutions, ONGAA CAM goes not produce one continuous toolpath / process.

The resulting ‘Nested MPR’ shown here in WoopWOP 5 still produces … Read the rest