Tag Archives: WoodWOP

Special Offer

DVD_H_picture25% off the License cost of ONGAA CAM BASIC – (3-axis).  on orders placed between Sep 15, 2021 and Oct 31, 2021.

 

ONGAA CAM provides one of the fastest (and most accurate) ways to program you HOMAG or BIESSE CNC machine directly from SOLIDWORKS.  No more LAYERS and DXF conversions.  No more editing programs in WoodWOP, Biesseworks/bSolid or aCADemy to ‘finish up’ the programs. All required process options are available while you work in SOLIDWORKS including tool selection, tool compensations, clearances and approach modes.

The ONGAA CAM G-Code version is also available for pure G-Code driver machines. (Contact us for details)

Make all your programs parametric with NO PROGRAMMING in WoodWOP or Biesseworks/bSolid or aCADemy! Works with parts or assemblies, resize them and generate new programs with ‘One-Click’.

Take a tour of ONGAA CAM

Options available for ONGAA CAM include Nesting, Edge Banding (Homag) and Networked License Manager.  ONGAA CAM … Read the rest

Comentarios desactivados en Special Offer

ONGAA CAM Generates MRPs in Inches

INCHES for Operators

Although the ‘underlying’ Units of measure of both SOLIDWORKS and WoodWOP are metric, this does not help operators accustomed to units in Inches.

Since one of the 4 ‘Guiding Mandates’ of ONGAA CAM is ‘ allow the operator to perform all operations as before’, we felt we should do something about this.

As of version 1.3.34, ONGAA CAM generates WoodWOP programs in Inches.  This is independent of the Units of Measure of the model or programming units.  Simply turn the option ON and ONGAA CAM creates the MPR with the WoodWOP Inch indicator ON and values in inches.  All ‘geometric measures’ are converted to Inches as the MPR is generated.  This includes all X,Y,Z locations, distances, radii and depths.

It should be noted that, at this time, programming in ONGAA CAM is still in metric (expected and displayed).  This ensures that all programs (old and new) will … Read the rest

Comentarios desactivados en ONGAA CAM Generates MRPs in Inches

Saw Processes – Selection Options


vsaw_icon

OVERVIEW

 

vsaw_sel1vsaw_details1The saw process toolpath selection always starts with a vertes (point) to define the start X & Y. In addition to the start ONGAA CAM expects one or more additional selection to define a direction AND a depth.  Basically, Start Here, go along here and this deep.

In this example, the dot represents the start point (Start Here), the top line provides the direction and end point ( Along here) and the lower line provides the depth (this deep).

When the final model no longer has continuous edges which can be selected as in this example, adding any addition edges or point will extend the cut to include the extra selections.

As with all ONGAA CAM defined processes, all WoodWOP options are available.   This includes groove width and %tool overlap (% of tool width used for each new pass.

 

vsaw_details2Once the toolpath has been selected ensure that … Read the rest

Comentarios desactivados en Saw Processes – Selection Options

Route Processes – Selection Options


Vroute_icon

OVERVIEW

 

vroute_details2Unlike WoodWOP, where contours and routing process are added in 2 separate steps, ONGAA CAM combines the process definition and the contour definition in the same panel.  This ensures that the information entered in the details is always directly related to this process only. In this section we will cover the route processes selection options (toolpath definition).

Contours generally start with the selection of a Vertex (start point).  After the start point is selected, it can be followed with one or more points or edges.

When edges are selected, the edge must be connected to the previous point (or edge).  ONGAA CAM will check for this connectivity when saving as a safety feature to ensure that contour elements are selected in the correct order.

 

 

 

selectloop1SOLIDWORKS makes it easy to select closed contours by using the ‘Select Loop’ option.

After selecting a start point, Right-Click on … Read the rest

Comentarios desactivados en Route Processes – Selection Options

Agarra la ola- Wave Board MPR para CNC Homag / Weeke

wavedesign

Paneles decorativos en producción no es nada nuevo, pero puede ser costoso. Algunas veces la cantidad requerida no justifica el costo y tiempo para ordenarlo.

Si ha ordenado y utilizado alguna (y tiene una maquina CNC Homag/Weeke) se ha preguntado, yo  podría hacer eso teniendo suficiente tiempo y el software correcto.

 

Pues, el software correcto ya esta disponible. WaveGenerator por ONG Solutions, crea archivo MPR listos para mecanizar y crear tablas onda. Ya que los MPR son 100% compatibles con WoodWOP, todas las opciones están disponibles para el operador. La aplicación es autónoma y no requiere software adicional.

 

Por consiguiente, porque hacer sus propios? He aquí algunas de las razones:

  • Costo: $600 por hoja comprada vs. una hoja de material estándar 4X8 maquinado en 17 minutos.
  • En solicitud: Materiales finales, nunca son retrasados por transporte o por la programación de fabricación de otros.
  • Desperdicio reducido: Ya que usted
Read the rest
Comentarios desactivados en Agarra la ola- Wave Board MPR para CNC Homag / Weeke

ONGAA CAM – Jerarquización

Jerarquización automática es un ahorro de tiempo vital para cualquier fabricante de gabinetes.

ONGAA CAN ofrece ahora, funcionalidad básica de auto jerarquización que funciona directamente del conjunto.

Las opciones incluyen:

  • Auto rotación de partes
  • Encajar horizontal o vertical
  • Alinear el grano sobre la hoja
  • Opción de ordenación, el cual puede alterar el orden de encajar las partes.
  • Producción multi hojas

Aquí está el MPR generado como se ve en WoodWOP, generado directamente de SOLIDWORKS.

Tiempo total de generar un juego de gabinete de 4 unidades redimensionado… 45 segundos!

Contáctenos hoy para que pueda ver, como ONGAA CAM incrementa su productividad (y posiblemente su calidad de vida). Programaremos una demostración web, utilizando sus partes y conjuntos para que usted vea que funcionara para su operación. Una versión de prueba de ONGAA CAM puede estar disponible después de la demostración.

Read the rest
Comentarios desactivados en ONGAA CAM – Jerarquización